What to do if…?

Troubleshooting by yourself

If, during operation, the dryer shows an error display (one or more displays flashing on the programme progress display), check first of all whether you can remedy the problem yourself by means of the table below. If you cannot solve the problem: Switch the machine off and on again. Reset programme. Press the START/PAUSE button.

If the error display is still shown, please contact our after-sales service and inform them which displays are flashing.

Problem

Possible cause

Remedy

 

 

 

 

Mains plug is not plugged in

Plug in at mains socket. Check

 

or fuse is not working cor-

fuse in fuse box (domestic in-

 

rectly.

stallation).

Dryer does not work.

Loading door is open.

Close loading door.

 

 

 

Base door is open.

Close base door.

 

Have you pressed the START/

Press the START/PAUSE button

 

PAUSE button?

again.

 

 

Select a different programme

 

Wrong programme selected.

the next time you dry

 

(see “Overview of pro-

 

 

grammes” section).

 

Lint filter clogged.

Clean lint filter.

 

Heat exchanger clogged

Clean heat exchanger.

 

with lint.

 

 

Drying results unsatis-

Incorrect volume of laundry.

Observe recommended load-

factory.

 

ing volumes.

 

 

 

Ventilation slots in base area

Uncover ventilation slots in

 

covered up.

base area.

 

Residue on inside surface of

Clean inside surface of drum

 

drum or drum ribs.

and drum ribs.

 

Conductance of water at in-

Re-programme standard set-

 

stallation site differs from

ting for degree of drying (see

 

standard setting of ma-

‘Programming options’ sec-

 

chine.

tion).

Loading door does not

Fine strainer not in place

Install fine strainer and/or

and/or large mesh filter not

snap large mesh filter into

close.

locked in place.

place.

 

 

 

 

19