Problem | Possible cause | Remedy | |
When pressing a but- | Washing protection. After | Turn the programme knob to | |
ton, the corresponding | the start of the programme, | ||
button flashes several | the option can no longer be | OFF. Set the programme again. | |
times. | set. |
| |
| Programme selector in OFF | Turn programme selector to | |
Drum light does not | position. | LIGHT or to any programme. | |
|
| ||
work. | Defective lamp. | Replace lamp (see next sec- | |
| |||
| tion). | ||
|
| ||
Programme inactive, |
| Empty condensate tank, then | |
EMPTY WATER display | Condensate tank is full. | start programme with START/ | |
illuminated. |
| PAUSE button. | |
Drying cycle ends | Not enough washing load- | Select time programme or | |
shortly after pro- | higher drying level (e.g. INTEN- | ||
ed or washing loaded is too | |||
gramme starts. END | SIVE DRY instead of STORAGE | ||
dry for selected programme. | |||
display illuminated. |
| DRY). | |
| Lint filter clogged. | Clean lint filter. | |
Drying cycle lasts an | Heat exchanger clogged | Clean heat exchanger. | |
unusually long time. | with lint. | ||
| |||
Note: | SPECIAL CARE button | SPECIAL CARE is only suitable | |
After up to 5 hours the | |||
pressed and load volume too | for use with loads of up to | ||
drying cycle finishes | big. | 3kg! | |
automatically | |||
|
| ||
(see ”Drying cycle | Load volume too big. | Reduce load volume. | |
complete”). |
|
| |
Laundry insufficiently pre- | Laundry must be adequately | ||
| |||
| drained. | ||
|
|
|
20