Changing bulb for inside light

Only use a special bulb which is designed specially for dryers. The special bulb is available from the after-sales service,

ET-Nr. 112 552 000-5.

1 Warning! Do not use standard bulbs! These develop too much heat and may damage the machine!

1 Warning! Before replacing the bulb, disconnect the mains plug; with a permanent connection: fully unscrew or deactivate the fuse.

1.Unscrew covering bonnet from above bulb (this can be found directly behind the loading aperture, at the top; refer to “Description of ma- chine” section.)

2.Replace defective bulb.

3.Screw covering bonnet back down.

1Warning! For reasons associated with safety, the covering bonnet must be screwed down tightly. If this is not done, the dryer must not be op- erated.

21