Programming options
Objective | Implementation |
|
|
1.Turn the programme selector to any programme. Permanently program 2. Press the AUDIBLE SIGNAL button and hold down for ap-
in the audible signal | prox. 5 seconds. | |
which reminds you that | A brief signal sounds several times. The AUDIBLE SIGNAL | |
the programme is com- | display flashes several times. | |
plete. | The setting is permanently programmed. | |
| The setting is cancelled as described under 1 and 2. | |
| 1. Turn the programme selector to any programme. | |
| 2. Press the SENSITIVE and START/PAUSE buttons at the | |
Adjust detection of de- | same time and hold down for approx. 5 seconds. | |
The current setting is displayed on the programme | ||
gree of drying: | ||
progress display: | ||
If the laundry is slightly | ||
– END display: Setting for drier laundry | ||
drier or slightly damp- | ||
– COOLING display: Standard setting | ||
er at the end of the | ||
– DRYING display: Setting for damper laundry | ||
programme than with | ||
3. Press the START/PAUSE button until the setting required | ||
the standard setting. | ||
appears on the programme progress display. | ||
| ||
| 4. Turn the programme selector to OFF. | |
| The setting is permanently programmed. | |
If the EMPTY WATER | 1. Turn the programme selector to any programme. | |
2. Press the SPECIAL CARE and AUDIBLE SIGNAL buttons at | ||
display is to remain | ||
the same time and hold down for approx. 5 seconds. The | ||
permanently deactivat- | ||
EMPTY WATER display flashes briefly. | ||
ed when using an ex- | ||
The EMPTY WATER display is permanently deactivated. | ||
ternal condensate | ||
Settings may be cancelled as under 1 and 2, but the EMPTY | ||
drain. | ||
WATER display is briefly illuminated (instead of flashing). | ||
|
22