Installation and connection instructions
1Installation safety instructions
•Before first starting up, all parts of the transport safety equipment must be removed. The machine may otherwise be damaged.
•Before starting up for the first time, ensure that the nominal voltage and type of current specified on the machine type plate match the nominal voltage and type of current at the installation site. The elec- trical fuses required can also be found on the type plate.
•Always connect the plug into a protection contact socket which has been installed as specified.
•With permanent connections: A permanent connection may only be established by an authorised specialist electrician.
•Do not install machine in rooms at risk of frost.
•Do not install on carpets with high piles. Air circulation will be hin- dered at the ventilation slots.
•Ensure that the machine is not placed on its mains cable.
•Install the machine horizontally.
Removing transport safety equipment
1 Caution! Before first starting up, all parts of the transport safety equipment must be removed. Keep the transport safety equipment for possible subsequent transport (moving house).
1. Open loading door
2. Pull off adhesive strips from inside machine on top of drum.
3.Remove foil hose and polystyrene
padding from the machine.
24