5Side Shelf/Side Burner Assembly
Side Shelves Attachment
1.Loosen the bolts on the side of the grill and attach the shelf by allowing the bolt heads to fall through the large opening in the bottom of the keyhole slots. Then slide the shelves downward until the bolts are resting against the top of the key hole slots. Tighten all of the shelf bolts.
(See Fig. 5)
2.Attach the wires coming out from the sides of the grill to the ignitor terminals. (See Fig. 6)
3.Repeat for second side shelf
Note: It does not matter which wire goes to which terminal on the four and two wire ignitor
Installing Side Burner Plates:
1.There are 2 Black Circle Plates that need to be installed for the Side Burner to operate correctly.
2.Lift the Grate off of the Side Burner.
3.Place the Black Circle on top of the one Burner. (Repeat Step for second burner.) (See Fig. 7)
4.Replace Grate on top of the dual burners. (See Fig. 8)
Fig. 5
Fig. 6
Fig. 7
Fig. 8
5
