HOW TO FINISH UNPACKING

￿Place appliance next to the cabinet in which it will be installed.

￿Remove the appliance packing except for bottom tray which should be left in position until the appliance is ready to be fitted into its cabinet.

NOTE: It is imperative that the appliance is left in the base to protect both the appliance and the floor.

￿Ensure the owner is given these operating instructions.

TOOLS REQUIRED

The following tools will be needed and it helps to assemble them before starting to install your oven:

A terminal screwdriver (3mm wide blade) A pozidrive screwdriver

Pliers Wirestrippers Knife Sidecutters Adhesive tape Tape Measure

MAKING THE ELECTRICAL

CONNECTIONS

Important: Switch off at mains, miniature circuit beaker and if appropriate, remove fuse before commencing any electrical work.

PREPARING CABLE

We recommend you use a new length of cable to ensure your safety.

￿Ensure you have the correct length of cable appropriate to the wiring method you are using. When fitting new cable allow sufficient cable for removal of the unit at a later date, should it be necessary.

￿Score, but do not cut through, around the sheathing with a knife 100mm (4in) from each end of the cable and break through to the encased wires by bending the cable backwards and forwards to fatigue the sheathing.

￿Carefully score down from each of the cable sheathing along the length of the bare earth wire (if a cut was made along the length of the live or neutral wires, it might cut into their sheathing) to the cuts already made.

￿Carefully prise open the sheathing at each end of the cable to expose the encased wiring.

TO REMOVE COVER OF MAINS TERMINAL

From the rear of the appliance, remove mains input terminal cover to gain access to terminal block.

￿First remove retaining screw with pozidrive screwdriver. See Fig. 5.

Fig. 5

￿Prise cover loose using screwdriver in position

(1)then lever off with screwdriver in position (2) at either side. See Fig. 6.

Fig. 6

10

Page 9 Page 11
Page 10
Image 10
Electrolux 949, 948 manual HOW to Finish Unpacking, Tools Required, Making the Electrical Connections, Preparing Cable
Page 9 Page 11

949, 948 specifications

The Electrolux 948 and 949 models are cutting-edge appliances that enhance the modern kitchen experience. Designed with user convenience and efficiency in mind, both models come equipped with an impressive array of features and technologies that set them apart in the competitive home appliance market.

One of the standout features of the Electrolux 948 and 949 is their advanced cooking technology. These models utilize induction cooking, which provides precise temperature control and faster cooking times compared to traditional gas and electric stoves. This technology not only enhances cooking efficiency but also ensures safety, as the cooktop remains cool to the touch, reducing the risk of burns.

The Electrolux 948 and 949 also boast a sleek, modern design that complements any kitchen décor. With intuitive touch controls and a responsive digital display, these models make cooking simpler and more enjoyable. They also feature built-in smart technology, allowing users to connect their devices for remote monitoring and control. With the Electrolux app, users can preheat their oven, set timers, and even receive notifications when their dish is ready.

Another key characteristic of the Electrolux 948 and 949 models is their spacious oven capacity. Both models come with multiple racks and large cooking surfaces, accommodating large family meals and special occasions. The ovens are equipped with a convection fan that ensures even cooking by circulating hot air throughout the interior, enhancing baking and roasting results.

Cleaning is made easy with the self-cleaning function available in both models. This innovative feature utilizes high temperatures to burn off food residue, leaving the oven clean without the need for harsh chemicals. The interiors are designed with smooth, easy-to-wipe surfaces, making maintenance a breeze.

In terms of energy efficiency, the Electrolux 948 and 949 are designed to be environmentally friendly. With energy-saving features and efficient performance, these appliances help reduce energy consumption compared to older models.

Overall, the Electrolux 948 and 949 offers a perfect blend of style, performance, and innovation. Their advanced cooking technologies, user-friendly features, and commitment to sustainability make them an ideal choice for any modern kitchen, appealing to both amateur cooks and culinary enthusiasts alike. The integration of smart technology further enhances the cooking experience, ensuring that users enjoy convenience and efficiency in their daily cooking routines.
Top Page Image Contents