Electrolux 948, 949 THE OVEN TIMER

Please note that this is a 24 hour clock, for example

2.00 pm is shown as 1400.

In the following pages we explain how to set the

controls. Read through them a few times until you

are familiar with the procedure.

If the oven is switched off on the wall, or there is a

loss of power, the clock will stop and you will not be

able to use the fan oven. When you first switch the

electricity supply on, the timer display will flash.

Turn the selector knob to 'Manual' then turn to 'Time

Setting'.

Set the correct time by turning and holding the

setting knob clockwise. Adjust the time by tur ning

the setting knob in either direction.

Turn the selector knob back to 'Manual'.

Turn the selector knob to ‘Countdown’. Turn the

setting knob clockwise until the display shows the

time you want. The bell symbol ( ) will be showing

and this will stay lit up during the time. Our diagram

shows the timer set to 5 minutes.

If you change your mind and want to cancel the time

you have set, simply turn the setting knob

anticlockwise. Then turn the selector to ‘Manual’.

When you are using the 'Countdown' you can make

the clock show the time of day by turning the selector

knob to ‘Manual’. The bell symbol will stay o n to

remind you that the 'Countdown' is set. At the end of

the timed period an alarm will sound and the bell

symbol will go out.

Switch off the alarm by turning the selector knob to

‘Time Setting’. Then turn to ‘Manual’ and the time of

day will show in the display.

You can use the 'Countdown' when an automatic

sequence has been set, as long as you remember

the following point.

1. Turn the selector knob to ‘Automatic’ as soon as

you have entered the timed period into the

display.

Cookpot symbol Bell symbol

Selector Setting knob

THE OVEN TIMER