Electrolux 98001 KF SN user manual What to do if …, Problem, Possible cause, Remedy

What to do if … 21

What to do if …

Problem	Possible cause	Remedy
The appliance cannot be	More than 10 seconds have	Switch the appliance on again.
switched on or is not operat	passed since the appliance was
ing	switched on
	The lock is switched on l	Switch off the lock (See the
		section “Locking/unlocking the
		control panel”)
	The child safety device is	Deactivate child safety device
	switched on l	(See the section “Child safety
		device”)
	Several sensor fields were	Only touch one sensor field
	touched at the same time
	Automatic switch off has been	Remove any objects (pan,
	triggered	cloths, etc.) that are lying on
		the control panel. Switch the
		appliance on again
	STOP+GO is activated u	Switching off STOP+GO
The residual heat indicator is	The cooking zone was only on	If the cooking zone is sup
not displaying anything	for a short time and is there	posed to be hot, call your local
	fore not hot	Service Force Centre.
The automatic warm up func	There is still residual heat on	Let the cooking zone cool
tion is not switching itself on	the cooking zone h	down
	The highest heat setting is set	The highest heat setting has
	Ç	the same power as the auto
		matic warm up function
Sensor fields are getting hot	Cookware too big or placed	Place cookware in the middle
	too near the controls	on one of the four cooking
		zoznes. Place large cookware
		on the back cooking zones in
		preference.
Repeated acoustic signal (6x),	One or more sensor fields have	Uncover sensor field
appliance switches off	been covered for longer than
	10 seconds
Acoustic signal sounds when	The control panel is wholly or	Remove objects.
appliance is switched off	partly covered by objects.
Acoustic signal sounds and	The On/Off sensor field has	Do not place any objects on
appliance switches itself on	been covered up, e.g. by a	the control panel
and then off again; after 5	cloth
seconds another acoustic sig
nal sounds