4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

50 100

Fig.3

850

250

450

All dimensions in

mm

700

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED. DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING.

This appliance must be connected to 220V-240V A.C. 50Hz supply. It is supplied with 2 metres of 5 amp 3 core cable incorporating a moulded 13 amp plug , fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. Ensure the plug is accessible to the user. If this is not long enough,

the supply cable can be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE

 

FOR ANY REASON, IT MUST BE DESTROYED OR

 

DISPOSED OF SAFELY, AS THE PROTRUDING

Fig.4

WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 5 amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

43

Page 42 Page 44
Page 43
Image 43
Electrolux CSIG 501 installation instructions Connecting to GAS, Connection to the Electricity Supply
Page 42 Page 44

CSIG 501 specifications

The Electrolux CSIG 501 is a standout model in the realm of modern kitchen appliances, catering to the needs of discerning homeowners who value both innovation and efficiency. This sophisticated appliance combines advanced technology with user-friendly features, making cooking not just a necessity but a delightful experience.

One of the primary features of the Electrolux CSIG 501 is its impressive energy efficiency. Designed with the environment in mind, this model boasts a high energy rating that helps reduce household energy consumption. This not only translates to lower electricity bills but also reflects Electrolux's commitment to sustainability and eco-friendly practices.

The cooking capabilities of the CSIG 501 are enhanced by its induction cooking technology. Induction cooking uses electromagnetic fields to directly heat pots and pans, resulting in faster cooking times and precise temperature control. This technology also ensures that the cooktop remains cool to the touch, reducing the risk of burns and enhancing safety in the kitchen.

Additionally, the Electrolux CSIG 501 features a sleek and modern design, equipped with a glass ceramic surface that not only looks stylish but is also easy to clean. The intuitive touch controls make it simple to adjust heat settings and cooking times, catering to both novice cooks and seasoned chefs alike. The appliance is equipped with a countdown timer and a residual heat indicator, providing added convenience and peace of mind while cooking.

Another noteworthy characteristic of the CSIG 501 is its versatile cooking zones. The model includes multiple cooking zones that can accommodate various pot sizes, allowing users to utilize the space efficiently. Some zones can even be combined to create larger cooking areas for tackling bigger pots and pans, showcasing the model's versatility.

Safety is further prioritized with features such as child lock functionality and automatic shut-off, ensuring that the appliance operates safely, even in busy households. With the Electrolux CSIG 501, users can enjoy the perfect blend of aesthetics, functionality, and safety.

In conclusion, the Electrolux CSIG 501 is a high-performance induction cooktop that exemplifies modern kitchen technology. Its energy-efficient operation, sleek design, advanced cooking features, and emphasis on safety make it a top choice for anyone looking to elevate their culinary experience. Whether you are preparing a quick meal or hosting a dinner party, the Electrolux CSIG 501 is a reliable partner in the kitchen, promising excellence with every culinary endeavor.
Top Page Image Contents