10Operation
FUSE REPLACEMENT
FUSE/S
Figure 3
IF LIGHTS FAIL TO OPERATE, DISCONNECT POWER AT THE SERVICE ENTRANCE. CHECK THE FUSE AND REPLACE IF NECESSARY.
1Remove grease filters.
2Remove the electrical box support and open the fuse box.
3 Unscrew the cap from the fuse holder and remove the fuse.
4Replace the fuse with the same size and amperage (5 x 20mm, 4 amp, 125 volt).
CAUTION
Use of a fuse greater than 4 amps may damage the transformer.
5Reconnect power at the service entrance.
