Operation 9
HALOGEN BULBS
This range hood requires four (4) halogen bulbs (Type MR16, 12V, 20W).
WARNING
Always switch off the electrical supply before performing any operations on the appliance.
To change bulbs:
1Loosen the ring nut by turning it counterclockwise.
2Remove the bulb by pulling downward (DO NOT ROTATE).
CAUTION
Bulb may be hot.
3Replace with a bulb of the same type (MR16, 12V, 20W). Do not touch replacement bulb with bare hands.
CAUTION | BULB |
| |
Use of bulbs greater than 20 watts will cause the fuse to open.. | RING NUT |
|
Figure 2
