12electrolux
Important: If in doubt, always select a lower steam level first until you have more experience with load volumes, fab- ric types and the corresponding opti- mum steam level. If too high a steam level is selected, garments may lose their shape. If too low a steam level is selec- ted, creases may remain.
Selecting additional functions
The additional functions available for the 
Iron Aid programmes are BUZZER, DELAY and the CHILD LOCK.
BUZZER 
The appliance is supplied with the BUZZER 
function activated. When the drying cycle has finished, an intermittent acoustic signal will sound. Each time a button is pressed or a programme is changed using the pro- gramme knob, an audible signal is also set to sound. The button is used to switch the func- tion on or off. When the function is active, the BUZZER 
symbol appears in the display.
DELAY
With the DELAY button, you can delay the start of a programme by between 30
minutes ( | ) and a maxi- |
mum of 20 hours ( | ). |
1.Select the programme and additional functions.
2.Press the DELAY button as many times
as necessary until the required start delay
appears on the display, e.g. 
if the programme is to be started in 12 hours.
3.To activate the delay timer, press the START/PAUSE button. The amount of time remaining until the programme is set to start is continuously displayed (e.g.
, | , |
, … | etc). |
If the display is showing 
and you press the button again, the
time delay will be cancelled. The display will show 
and then the duration of the selected programme.
CHILD LOCK 
The child lock can be set to prevent a pro- gramme being accidentally started or a pro- gramme in operation being accidentally changed. The child safety device locks all buttons and the programme knob. The child safety device can be activated or deactivated by holding down the BUZZER and TIME but- tons simultaneously for 5 seconds.
•Before programme is started: Appliance cannot be used
•After programme is started: Programme in operation cannot be changed
The symbol 
appears in the display to in- dicate that the child safety device is activa- ted. The child safety device is not deactivated once the programme comes to an end. If you want to set a new programme, you must first deactivate the child safety device.
Starting an Iron AidTM programme
Press the START/PAUSE button. The pro- gramme is started. First, the drying phase in- dicator appears in the display. The display will also show the programme duration for the selected Iron Aid programme, not includ- ing the additional drying phase. With wet laundry, after a few minutes the appliance will show the correct programme duration for the Iron Aid programme including the preceding drying programme. As soon as the right level of dryness is reached, the Iron Aid pro- gramme will start automatically. The steam
indicator shows the progress of the Iron Aid programme in the display. The individual steam phases are shown by animated clouds of steam.
Caution! Important: During the steam phases that form part of the Iron Aid programme and also the
