Electrolux EDI97170W Drying, Changing a programme, Iron Aid programme complete / removing laundry

If the water tank indicator lights up when you select an Iron Aid programme, the pro- gramme cannot be started. You will need to fill the water tank first (see section on ‘Clean- ing and maintenance,filling water tank’.)

It is normal for the appliance to make noises during an Iron Aid or drying pro- gramme if garments with hard parts, such as metal buttons, are put in the drum.

Changing a programme

To change a programme which has been se- lected by mistake once the programme has started, first turn the programme selector to O OFF and then reset the programme.

The programme can no longer be changed directly once the programme has started. If you nevertheless attempt to change the programme with the pro- gramme knob or an additional function button (except the BUZZER button), the

START/PAUSE button and will flash in the display. The drying pro- gramme is not however affected by this.

Putting in extra items or taking items out be- fore end of programme

1.Open door.

2.Load or remove laundry items.

3.Close door securely.

4.Press the START/PAUSE button to con- tinue the drying cycle.

Iron Aid programme complete / removing laundry

After the Iron Aid phase has ended, is illuminated and the icon AN-

electrolux 13

TICREASE appears in the display. If the BUZZER has been activated, an audible sig- nal sounds at regular intervals.

The Iron Aid programme is automatically followed by an anti-crease phase, in- cluding brief steam phases, which lasts around 90 minutes.

The drum rotates during the anti-crease phase. This keeps the laundry loose and free of creases. It can be removed at any point during the anti-crease phase, except during steam phases (look for steam animation in the display!). Laundry should be removed as quickly as possible.

1.Open the loading door to remove the laundry.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Cleaning and maintenance” section.)

3.Remove laundry one garment at a time.

4.Turn the programme knob to O OFF. Important! After each drying cycle

–Clean the micro-fine filter and fine filter

–Drain the condensed water container (See section “Cleaning and mainte- nance”.)

5.Close door.

Caution! To retain the effects of the Iron Aid treatment, clothes must be removed one garment at a time during the anti- crease phase and hung immediately on

aclothes hanger to dry (for at least 5-15 mins, depending on fabric and selected steam level). Do up the buttons and tug the garment into shape, paying particu- lar attention to cuffs and seams.

Drying

Overview of drying programmes

Programmes

max. load (weight when dry)

Additional functions / options

BUZZER DELICATE DRYNESS TIME

Application/properties

COTTON

Care symbols