light up. In order to continue the programme, the condensed water container must first be emptied.

Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.

1.Pull drawer containing condensed water container all the way out (1) and pull up the condensed water container’s drain- age pipe as far as it will go (2).

2.

1.

2.Pour out the condensed water into a ba- sin or similar container.

3.Push drainage pipe in and refit con- densed water container.

If the programme has been interrupted as a result of the condensed water container being full: Press the START/PAUSE but- ton to continue the drying cycle.

The condensed water container has a volume of approx. 4 litres. This is suffi- cient for around 7 kg of laundry which has previously been spun at 1000 revo- lutions/ minute.

4.The condensed water can be used as distilled water, e.g. for steam irons. How- ever, first filter the condensed water to

electrolux 19

remove any residues and small pieces of fluff.

Using the attached canister to filter: Pour the water out of the container straight through the filter at the top of the canis- ter.

Cleaning heat exchanger

If the HEAT EXCHANGER is displayed, the heat exchanger needs to be cleaned.

Caution! Operating when the heat exchanger is blocked with fluff can damage the dryer. This also increases energy consumption.

1.Open door.

2.Open door in plinth. To do this, press the release button on the bottom of the door aperture and open the door in the plinth to the left.

3.Clean fluff from the inside of the door and the heat exchanger front chamber. Wipe the door seal with a damp cloth.

4.Turn both lock washers inwards.

Page 19
Image 19
Electrolux EDI97170W user manual Cleaning heat exchanger