electrolux 9
To activate recirculation set valve to the ON position. To do that:
1.Pull drawer containing condensed water container out a little (1). Behind the draw- er there is water tank’s filler neck (2).
max
4. Push filler neck and drawer with con- densed water container back in.
When dry, all textiles not specifically prohibi- ted in the chapter ‘Sorting and preparing laundry’ may be treated with the Iron Aid Steam System. Wet textiles may only be trea- ted if they are labelled as suitable for dry pro- grammes.
Water recirculation system
This system allows you to automatically use for an Iron Aid Steam cycle the condensed water collected in the condense water tank during a drying cycle.
Caution! The water in the condense water tank will never automatically fill the steam water tank. The water recirculation system works only if it is supplied by water arising during standard drying cycles.
To activate this system turn the valve to the ON position. When the valve is ON the steam water tank will be filled during the next drying cycle. Water will be supplied by the water circuit directly to the steam water tank filling it automatically.
2
1
2.Turn the valve to the ON position. Water will be supplied by the water circuit di- rectly to the steam water tank filling it au- tomatically during the next drying cycle.
The steam water tank is empty. Please fill it and then press START/PAUSE
If valve is closed (OFF position) recircu- lation system does not work.
Overview of Iron Aid programmes
Programmes
COTTON
SYNTHETICS
max. load (weight when dry)
1.0kg
1.0kg
Additional
functions / op-
tions
LOAD | BUZZER |
|
|
• | • |
|
|
• | • |
|
|
Application/properties
For 1- 6 cotton shirts. Min. 80% natural fibres (cotton, linen etc).
For 1- 6 synthetic shirts. Max. 20% nat- ural fibres (cotton, linen etc).
wet,
dry
wet,
dry
