10electrolux
After cleaning, dry the appliance with a soft cloth.
The stainless steel can become tarnished if it is too much heated. Refer to this you must not cook with potstones, earthenware pans or cast iron plates. Do not use alumi- nium foil to prevent damage the top during operation.
Removing the dirt:
1.– Remove immediately: melting plas- tic, plastic foil, and food containing sugar.
–Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass or stainless steel.
2.Clean the appliance with a damp cloth and some detergent.
3.At the end rub the appliance dry with a clean cloth.
Cleaning of the spark plug
This feature is obtained through a ceramic ignition candle with a metal electrode. Keep these components well clean to prevent dif- ficult lighting and check that the burner crown holes are not obstructed.
Periodic maintenance
Periodically speak your local Service Force Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fit- ted.
WHAT TO DO IF…
Problem
There is no spark when lighting the gas
The flame is blow out immedi- ately after ignition
The gas ring burns unevenly
Possible cause
•There is no electrical supply
•Burner cap and crown are placed uneven
•Thermocouple is not heated sufficient
•Burner crown is blocked with food residues
Remedy
•Make sure that the unit is connected and the electrical supply is switched on.
•Control the fuse. If the fuse is released more than one time, refer to a qualified electrician.
•Make sure that the burner cap and crown are in correct positions.
•After lightning the flame, keep the knob pushed for approximately 5 seconds.
•Make sure that the injector is not blocked and the burner crown is clear of food parti- cles.
