•Use only the accessories supplied with appliance.
•Be careful when you connect the appli- ance to the near sockets. Do not let elec- tricity bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.
Installation
•You must read these instructions. The manufacturer is not responsible for any injury to persons and pets or damage to property caused by failure to obey these requirements.
•To prevent the risks of structural damage or physical injury, installa- tion, connection of the appliance to the power supply and gas system, setting up and maintenance must on- ly be done by qualified personnel in compliance with standards and local regulation force.
•Make sure that the appliance is not dam- aged because of transport. Do not con- nect a damaged appliance. If it is neces- sary, speak to the supplier.
•Only use
•Do not install the hob over a domestic appliances if the installation instructions do not allow it.
•Install the appliance only on a worktop with flat surface.
•Do not change the specifications or mod- ify this product. There is the risk of injury and damage to the appliance.
•Fully obey the laws, ordinances, direc- tives and standards in force in the coun- try where you use the appliance (safety regulations, recycling regulations, electri- cal safety rules etc.)
•Keep the minimum distances to other ap- pliances and units.
•Install
•Prevent damage of the cut surfaces of the worktop against moisture with a cor- rect sealant.
•Seal the appliance to the worktop with no space left with a correct sealant.
electrolux 3
•Prevent damage to the bottom of the ap- pliance from steam and moisture, e.g. from a dishwasher or oven.
•Do not install the appliance adjacent to doors and below windows. Hot cook- ware can be hit off the hob when you open the doors or windows.
•Before installation, make sure that the lo- cal supply conditions (gas type and pres- sure) agree with the adjustment of appli- ance. The adjustment conditions for the appliance are on the rating plate, which you can find near the gas supply pipe.
•This appliance is not connected to a combustion products evacuation device. It must be installed and connected in ac- cordance with current installation regula- tions. Particular attention must be given to the relevant requirements regarding ventilation.
•The use of a gas cooking appliance cause heat and moisture in the room in which it is installed. Make sure that the ventilation in the kitchen is good: keep natural ventilation holes open or install a mechanical ventila- tion device (mechanical extractor hood).
•More ventilation (for example open- ing of a window or increasing the lev- el of mechanical ventilation where present) is necessary when you oper- ate the appliance with intensity for a long time.
•Carefully obey the instructions for electri- cal connections. There is the risk of injury from electrical current.
•Disconnect the appliance from the electrical supply, before you do the maintenance work or you clean it.
•The electrical mains terminal is live.
•Make electrical mains terminal free of voltage.
•Install correctly to give
•A loose and incorrect mains plug and socket connections can make the termi- nal become too hot.
•A qualified electrician must install the clamping connections correctly.
•Use a strain relief clamp on cable.
•Use the correct mains connection cable and replace the damaged mains cable
