8electrolux
PRODUCT DESCRIPTION
6
Control knobs
Symbol
3
4
5
Description
no gas supply / off position
1
2
3Control knobs
4Spark generator button
5Auxiliary burner
6Rapid burner
Symbol |
| Description |
ignition position / maximum gas supply
minimum gas supply
OPERATING INSTRUCTIONS
Ignition of the burner
Warning! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1.Push and hold the spark generator but- ton 
.
2.At the same time turn the control knob counterclockwise to the maximum posi-
tion 
and push it down to light the burner.
3.Release the spark generator button when burner lights but keep the control knob on this position for approximately 5 seconds; this will let thermocouple to warm up. If not, the gas supply will be interrupted.
4.Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct positions.
1
2
3
4
1Burner cap
2Burner crown
3Ignition candle
4Thermocouple
Warning! If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute.
Important! In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it
