18
Figure 27. Place the right end of the aluminium bar “A”
in the proper slot located in support “C”.
Figure 28. Place the left end of the aluminium bar “A” in
the proper slot located in support “B”. Now, insert
support “B” in its original position and make sure the
assembly is well fixed and stable.
Models in stainless steel or aluminium:
We recommend to clean the oven door using only a
wet sponge and dry it up after cleaning with a soft cloth.
Never use steel wool, acids or abrasive products as
they can damage the oven surface.
Clean the oven
control panel following the same precautions.
If necessary, it is possible to reverse the oven
door. This operation should be carried out by
authorized personnel ONLY.
Customers are recommended not to carry out
this operation themselves. This will be a
chargeable visit.
A
C
A
B
Figure 27
Figure 28