electrolux 35
necessary to fit between the appliance
and the mains an omnipole switch, with
a minimum gap between contacts of 3
mm, suitable for the required load and
in compliance with rules in force.
The green & yellow ground wire must
not be interrupted by the switch and it
should be 2-3 cm. longer than the other
cables.
The supply cable must in all cases be
laid out in such a way as to ensure that
it does not reach at any given point a
temperature 50°C higher than the
ambient temperature.
Suitable power supply cables are the
following types, considering the
respective necessary section of cable:
H07 RN-F, H05 RN-F, H05 RR-F, H05
VV-F, H05 V2V2-F (T90), H05 BB-F.
The replacement of electric cable
must be carried out exclusively by
the service force centre or by
personnel with similar
competencies, in accordance with
the current regulations.
Terminal block
The oven has an easily accessible
terminal block, which is meant to work
with an electric single-phase rate of 220
V.
The Manufacturer disclaims any
liability in case these
accident-preventing rules are not
observed.