18troubleshooting electrolux water aid washing machine

Troubleshooting

Problem

Possible causes (digital display code)

What to do

Clothes still dirty after

Not enough or no detergent.

Check detergent use and rewash clothes.

wash program.

Too many clothes in load.

Remove some clothes and rewash.

 

 

Incorrect selections for Program, Dirt

Reselect settings.

 

Level or water Temp.

 

 

Incorrect water level selected.

Use auto sensing water level and rewash clothes.

Clothes still wet or

Poor rinsing and spin due to excessive

In future use less detergent & ONLY use a low sudsing,

sudsy after wash

suds. (

)

front load washer detergent in this machine, such as Cold

program

 

 

Power for Front Loaders and High Efficiency Top Loaders or

 

 

 

detergent labelled “Matic”.

Scraping noise on spin.

"RAåWIREåORåOTHERåTHINåITEMåCAUGHTå

If item is visible, remove with pliers.

 

between inner and outer washbowls.

Use wash bag in future.

Humming, clicking

"OWLåROTATIONåATåSTARTåOFåWASH

Normal noise.

and other intermittent

7ATERåmOWCASCADEåNOISEåFROMå

Normal noise that may be heard during water recirculation

noises.

recirculated water entering washbowl

when pump is ON.

 

Lid will not open

Machine is at a spin stage and

If you want to access the bowl, wait until stage is complete

 

‘Lid Locked’ light is ON

and light is OFF. Then you can open the lid.

 

At end of wash. Machine is finishing final

7AITåAåSHORTåWHILEåUNTILå@,IDå,OCKEDåLIGHTåISå/&&

 

spin & the lid lock release stage.

 

 

Lid may be stuck in the locked position.

If ‘Lid Locked’ light is OFF, press Power to turn off machine,

 

 

 

then press Power again. If lid still will not open you should

 

 

 

call Service.

Page 22
Image 22
Electrolux EWT606, EWT806 user manual Troubleshooting electrolux water aid washing machine