The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, or a concealed space of a building.

Do not use an exhaust hood with a magnetic latch.

Do not install flexible metal vent in enclosed walls, ceilings or floors.

Use clamps to seal all joints. Exhaust vent must not be connected or secured with screws or other fastening devices which extend into the interior of the duct. Do not use duct tape.

IMPORTANT: Observe all governing codes and ordinances.

Improper venting can cause moisture and lint to collect indoors, which may result in:

Moisture damage to woodwork, furniture, paint, wall- paper, carpets, etc.

Housecleaning problems and health problems.

Use a heavy metal vent. Do not use plastic or metal foil vent.

Rigid metal vent is recommended to prevent crushing and kinking.

Flexible metal vent must be fully extended and supported when the dryer is in its final position. Remove excess flexible metal vent to avoid sagging and kinking that can result in reduced airflow and poor performance.

An exhaust hood should cap the vent to prevent rodents and insects from entering the home.

Exhaust hood must be at least 12" (30.5 cm) from the ground or any object that is in the path of the exhaust (such as flowers, rocks or bushes, etc.).

If using an existing vent system, clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint. Replace any plastic or metal foil vent with rigid metal or flexible metal vent.

Plan Vent System

Typical exhaust installations

Typical installations vent the dryer from the rear of the dryer. Other installations are possible.

 

B

 

C

 

D

A

E

 

F

 

G

 

H

A. Dryer

E. Clamps

B. Elbow

F. Rigid metal or flexible metal vent

C. Wall

G. Vent length necessary to connect elbows

D. Exhaust hood

H. Exhaust outlet

Optional exhaust installations

This dryer can be converted to exhaust out the right side, left side, or through the bottom. Contact your local dealer to have the dryer converted.

WARNING

Fire Hazard

Cover unused exhaust holes with one of the following kits:

279818 (white)

280028 (meteorite)

Contact your local dealer.

Failure to follow these instructions can result in death, fire, electrical shock, or serious injury.

ABC

A. Standard rear offset exhaust installation B. Left or right side exhaust installation

C. Bottom exhaust installation (Not an option with pedestal installations.)

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best for your installation. Two close-clearance installations are shown. Refer to the manufacturer’s instructions.

AB

A. Over the top installation (also available with one offset elbow)

B. Periscope installation

9

Page 9
Image 9
Electrolux FKGHS01P manual Plan Vent System, Typical exhaust installations, Optional exhaust installations

FKGHS01P specifications

The Electrolux FKGHS01P is a highly regarded kitchen appliance that brings together innovation, design, and functionality. This cooking device is not just a standard kitchen appliance; it epitomizes modern cooking technology, ensuring a seamless culinary experience.

One of the main features of the FKGHS01P is its advanced induction cooking technology. Induction cooktops are known for their quick heating capabilities, and the FKGHS01P excels in this category. Induction cooking works by generating heat directly in the cookware through electromagnetic energy, which can reduce cooking times significantly. This also translates to increased energy efficiency as it wastes less heat than traditional gas or electric cooktops.

The appliance boasts a sleek and contemporary design, which makes it an attractive addition to any kitchen. Its smooth surface is easy to clean, and the minimalistic aesthetic fits well with modern kitchen decor. With intuitive controls, users can easily adjust cooking temperatures and settings, providing a user-friendly cooking experience.

Another standout feature of the Electrolux FKGHS01P is its versatile cooking zones. The induction cooktop includes multiple cooking zones of varying sizes, allowing users to accommodate a range of pot and pan sizes. Whether you're boiling pasta or simmering sauces, there is enough room to cook multiple dishes simultaneously.

Equipped with safety features, the FKGHS01P includes child lock settings and automatic shut-off systems, providing peace of mind for families. Furthermore, the induction technology allows for quick temperature adjustments, enhancing control over cooking processes and reducing the risk of burns or accidents.

In terms of smart technology, the Electrolux FKGHS01P integrates seamlessly with smart home systems, enabling connectivity and convenience. Users can monitor their cooking from a mobile device, receive notifications, and even manage timers remotely.

In summary, the Electrolux FKGHS01P offers a blend of state-of-the-art technology, safety, and sleek design. With its induction cooking capabilities, versatile zones, and smart home integration, it caters to both novice cooks and culinary enthusiasts alike. Its commitment to efficiency and user-friendliness makes it a standout appliance in the contemporary kitchen landscape.