Electrolux FM4863-an manual What to do if …, Problem Possible cause Remedy

What to do if …

Problem	Possible cause	Remedy
The cooking zone cannot	More than 10 seconds have	Switch the appliance on
be switched on or is not	passed since the appliance	again.
operating	was switched on
	The child safety device is	Deactivate child safety de-
	switched on	vice (See the section “Child
		safety device”)
	Several sensor fields were	Only touch one sensor field
	touched at the same time
	Safety cut-out has been	Remove any objects (pan,
	triggered	cloths, etc.) that are lying
		on the control panel.
		Switch appliance on again
The residual heat indicator	The cooking zone was only	If the cooking zone is sup-
is not displaying anything	on for a short time and is	posed to be hot, call the
	therefore not hot	Customer Service Depart-
		ment.
Power function cannot be	The Power function func-	Let cooking surface cool
switched on	tion has already been acti-	down.
	vated several times quickly
	one after the other
lights up	Unsuitable cookware	Use suitable cookware
	No cookware on the cook-	Put cookware on zone
	ing zone
and number are dis-	Electronics fault	Disconnect the appliance
played		from the electrical supply
		for a few minutes (Take the
		fuse out of the house’s wir-
		ing system)
		If after switching on again,
		is displayed again, call
		the customer service de-
		partment
It is very hard to adjust the	Potential differences	Do not touch the pan han-
heat settings		dle when setting the heat
		settings and do not posi-
		tion over the control panel.

17