7:4
FUNCTION DEFAULT
VALUE
EXPLANATION
ADJUST TIME ALLOWED N Change of the “step time” (See display) e.g. wash/
rinse/etc time during a program operation.
ADJUST TEMPERATURE ALLOWED N Change of the temperature within a sequence during
program operation
RAPID ADVANCE ALLOWED Y Permission to rapid advance during a program ope-
ration
SHOW WEIGHT ALLOWED Y Option to show scale output in the display.
WATER REDUCTION NOT ALLOWED Y Some normal washing machines with this type of
control can have an automatic system with water
reduction depending on load weight. For the FOM 71
CLS this function must always be Y.
MANUAL FUNCTIONS ALLOWED Y The functions in “Manual Mode” (See display under
Menu) are active
PAUSE ALLOWED Y Pause function can be activated with the pause
button.
FREE TEXT ALLOWED Y Option to write a free text area for each wash pro-
gram. This is used in order to shift between pro-
grams using the scale or level control, see manual
Programming FOM 71 CLS, chapter Programming
text page 42.
CHANGE WASH PROGRAM ALLO-
WED
Y Possibility to change to a different wash program
during a program operation
AUTO RESTART ALLOWED Y Automatic restart possible. The same program will be
restarted as many times as desired when selecting
the function Auto restart in wash program display.
ADJUST SPIN SPEED ALLOWED Y A possibility to change the spin speed during an
extraction in an ongoing wash program
DISPLAY REMAINING TIME Y Remaining time will be shown in display during
program operation Note: The remaining time will not
be shown the very first time a specific program is
running.
DISPLAY ACTUAL TEMPERATURE Y Actual bath temperature will be shown in the display
during program operation
DISPLAY ACTUAL SPEED Y Actual machine speed will be shown during the pro-
gram operation
MACHINE NOT HEATED N Should be set to Y if programs without thermostop
shall be used. ( Fixed program time programs)
If set to N the wash programs will be programmed
with thermostop. (The program will wait for the tem-
perature to reach set temperature before count down
of set time.
Adjustment of temperature, speed and water
Table 1: Parameters in Settings 1