Electrolux LAVAMAT 84745 manual If the Easy Iron programme was selected, Wash

Operating Instructions

If the EASY IRON programme was selected:

After the EASY IRON programme has finished an anti-crease phase, lasting approximately 30 minutes, follows. Here, the multi display shows the remaining time (e.g. 1 minute) and the END indicator is illuminated. The washing can be removed at any time during the anti- crease phase.

01. To remove the washing during the anti-crease phase, press the START/ PAUSE button. The door can now be opened.

2.Then turn the programme selector to OFF. The wash programme has come to an end.

3	If the OVERDOSING indicator illuminates, then too
	much detergent was used in the washing programme
	just completed. Observe the dosing recommendations
	of the detergent manufacturer as well as the load quantity for the next
	wash.

Important: If the washing machine is not to be used for a long period: Close the water tap and disconnect the washing machine from the electricity mains. (Anti-flood: The Aqua Control with Aqua Alarm does not function if the power supply is interrupted).

28