Operating Instructions
36
Water leaks out of the
washing machine.
The screw Connection on the
inlet hose is leaking.
Tighten the inlet hose screw
connection.
Drainage hose is leaking. Check the drain hose and re-
place it if necessary.
The drain pump cover is not
correctly close. Close cover correctly.
Washing is caught in the
door.
Stop the programme, remove
the washing caught in the
door. Restart the programme.
The emergency emptying
hose is not correctly closed
or is leaking.
Close the emergency empty-
ing hose (see section „Carry
out emergency emptying“).
Call your local Service Force
Centre if the emergency
emptying hose is leaking.
The drain pump runs
constantly - even when
the appliance is
switched off.
The Aqua Control anti-flood
system has been activated.
Close the water tap, remove
the mains plug and inform
your local Service Force Cen-
tre.
Fabric softener was not
rinsed in, compart-
ment æ for condition-
ers is filled with water.
The insert in the comparti-
ment for conditioners is not
correctly attached or is
blokked.
Clean the detergent dis-
penser drawer and attach the
conditioner insert correctly.
Washing is heavily
creased.
Probably too much washing
has been put in drum.
Pay attention to the maxi-
mum load quantity (see pro-
gramme tables). In the case
of easy-care fabrics select
the EASY IRON programme.
The washing has not
been spun as dry as
usual.
The washing was not able to
be distributed evenly in the
drum prior to spinning.
Always load the drum as ful
as possible with a combina-
tion of large and small items.
Problem Possible cause Remedy