Installation and connection instructions
54
Water pressure
The appliance is designed to operate within the following water
pressure units. Minimum 1 bar (= 10N/cm2 = 0.1 Mpa), maximum
10 bar (= 10 0N/cm 2 = 1 Mpa).
•If more than 10 bar: Install a pressure-reduction valve upstream
•If less than 1 bar: Unscrew the inlet hose from the appliance at the
inlet solenoid valve and remove the flow regulator (to do this, remove
the filter with needle nose pliers and remove the rubber washer be-
hind the filter). Replace the filter.