4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Carry out a gas tightness test after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

50 100

850

Fig.3

700

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

450

All dimensions in

mm

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED.

 

DO NOT EARTH THIS APPLIANCE TO THE GAS

 

SUPPLY PIPING.

Fig.4

This appliance must be connected to 230V-240V A.C.

 

50Hz supply. It is supplied with 2 metres of 5 amp 3

 

core cable incorporating a moulded 13 amp plug , fitted

 

with a 3 amp fuse, which can be plugged directly into

 

the nearest suitable socket. Ensure the plug is accessible

 

to the user. If this is not long enough,the supply cable

 

can be replaced totally by a longer cable at least 0.75mm²

 

nominal cross sectional area (24/0.2mm).

 

IF THE MOULDED PLUG IS CUT FROM THE CABLE

FOR ANY REASON, IT MUST BE DESTROYED OR

DISPOSED OF SAFELY, AS THE PROTRUDING

WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3 amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

43

Page 42 Page 44
Page 43
Image 43
Electrolux SG 551 installation instructions Connecting to GAS, Connection to the Electricity Supply
Page 42 Page 44

SG 551 specifications

The Electrolux SG 551 is a state-of-the-art vacuum cleaner designed to meet the demands of modern households. Known for its powerful suction capabilities and advanced filtration system, the SG 551 combines efficiency with user-friendly features, making it a popular choice among consumers.

One of the standout characteristics of the Electrolux SG 551 is its strong suction power, which is facilitated by a robust motor. This allows the vacuum to effectively pick up dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and upholstery. Its adjustable suction settings enable users to tailor the vacuum's performance based on the type of flooring being cleaned, ensuring optimal results with ease.

Incorporating advanced technology, the SG 551 features a Multi-Cyclonic Filtration System. This system enhances dust separation, reducing the amount of dust that escapes back into the air. This not only helps to maintain a cleaner environment but also ensures that the vacuum's filters last longer, requiring less frequent replacements. The HEPA filtration option available in some models traps allergens and fine particles, making it an excellent choice for allergy sufferers.

The Electrolux SG 551 is designed for convenience and ease of use. Its lightweight construction makes it easy to maneuver, allowing users to glide seamlessly from room to room. The vacuum is equipped with a range of accessories, including a crevice tool, dusting brush, and upholstery nozzle, providing versatility for different cleaning tasks. These attachments are conveniently stored on the vacuum, ensuring that they are always accessible when needed.

Another notable feature of the SG 551 is its quiet operation. Electrolux has engineered this vacuum with noise-reduction technology, making it a preferable option for those who wish to clean without disturbing family members or neighbors.

The ergonomically designed handle provides a comfortable grip, making it easier for users to control the vacuum during extended cleaning sessions. Additionally, the vacuum has a compact design, allowing for easy storage in tight spaces.

In conclusion, the Electrolux SG 551 combines power, efficiency, and convenience in one comprehensive package. With its superior suction, advanced filtration, and user-friendly features, it stands out as an excellent choice for anyone looking to maintain a clean and healthy home. This vacuum not only meets the essential cleaning needs but also enhances the overall cleaning experience for users.
Top Page Image Contents