Checking the Grill, Checking the Hotplate

S I G 5 3 0

If the wiring is extended or a completely new cable fitted a 3-pin 13	GREEN AND
amp plug should be fitted. (See Fig.4a). Connect the wires as	YELLOW
follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or by the

earth symbol or coloured GREEN or GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the BLUE terminal which is marked with the letter 'N' or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket. Plug in the appliance.

6.PRESSURE TESTINGPlug in the appliance.

Fig.4a

3 AMP

BROWN

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and

remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i) For Natural Gas

20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the trivet into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

SIG 530 specifications

The Electrolux SIG 530 is a cutting-edge kitchen appliance designed to elevate culinary experiences for home chefs and cooking enthusiasts alike. This product line showcases Electrolux's commitment to merging functional design with innovative technology, making it a standout in the crowded home appliance market.

One of the key features of the Electrolux SIG 530 is its advanced cooking technology. The appliance is equipped with Intelligent Cooking, which utilizes a sensor-based system to monitor cooking progress and adjust settings automatically. This technology ensures that meals are consistently cooked to perfection, taking the guesswork out of the cooking process. Whether you are roasting, baking, or grilling, the SIG 530 maintains optimal temperatures for desired results.

Another hallmark of the SIG 530 is its spacious and versatile cooking area. Designed to accommodate large dishes, it features a generous capacity that makes it perfect for family meals or entertaining guests. The flexible cooking zone allows for multiple dishes to be prepared simultaneously, increasing efficiency and saving valuable time.

The Electrolux SIG 530 also integrates user-friendly controls, featuring an intuitive digital interface that simplifies navigation. With easy-to-read displays and simple touch controls, users can quickly select cooking modes, set timers, and adjust temperatures with minimal effort. This focus on usability ensures that the appliance can be enjoyed by individuals of all cooking skill levels.

Additionally, the SIG 530 is designed with energy efficiency in mind. It adheres to modern standards of sustainability while providing powerful performance. The appliance reduces energy consumption without compromising quality, enabling users to save on utility bills while minimizing their environmental footprint.

Cleaning and maintenance are made hassle-free thanks to the appliance’s self-cleaning function and removable parts. This thoughtful design feature enhances convenience and helps maintain the appliance in pristine condition after every use.

With its sleek design, high-tech features, and focus on energy efficiency, the Electrolux SIG 530 is a worthy addition to any modern kitchen. Its blend of performance and practicality makes it an essential tool for achieving culinary excellence, catering to the needs of both novice cooks and seasoned chefs. This appliance is a testament to Electrolux's dedication to quality and innovation in the kitchen appliance industry.

Electrolux SIG 530 Checking the Grill, Checking the Hotplate, Checking LID SHUT-OFF Device

Models: SIG 530

YELLOW