Example
uwd
displays the path to the current directory on the printer. For example,
D:\DATA
T r o u b l e s h o o t i n g
Consult the following table if any errors occur while you are using UClient and UServe. The messages can appear individually or together. They are listed alphabetically.
Message | Solution |
|
|
Cannot find the requested file. | Verify that the specified file exists |
| and you spelled its name correctly. |
| Then, retry the command. |
Command Failed. | Verify that a valid PC/printer |
| connection exists. If so, then verify |
| the syntax and parameters of the |
| command and |
Connection Closed to Ultra | You tried to close a PC/printer |
| connection that already is closed. |
Connection to the Ultra has not | Establish a PC/printer connection. |
been opened | See “Establishing a PC/Printer |
| Connection.” |
Could not create directory: | There is not enough disk space to |
| create a directory. Free some space |
| before trying again. |
Could not delete file: | You specified a |
| the command. Verify the spelling of |
| the name and try again. |
Could not establish a | Reboot the printer and |
connection with the Ultra. | the PC/printer connection. If this |
| error still occurs, have the printer |
| serviced. |
Using UServe and UClient
