
s c n S e t D 2 o f 5 I n f o
Description
LMSSCEN.LIB only. Saves the scanner configuration values the application set in the D2OF5INFO data structure. See “D2OF5INFO” in Chapter 5 for a description of this data structure.
To configure the scanner, the application:
1 . Enables the scanner with scnOpenScanner or scnOpenScannerShared.
2 . Calls scnGetD2of5Info.
3 . Sets the values in the D2OF5INFO data structure.
4 . Calls scnSetD2of5Info.
When the application disables the scanner,
the configuration values go back to the
defaults.
Syntax
short far scnSetD2of5Info(LPD2OF5INFO lprD2of5Info);
Parameters
lprD2of5Info A pointer to a D2OF5INFO data structure.
Return Values
0 | Successful. |
Invalid configuration value. | |
The scanner is disabled. |