p c l C a l i b r a t e P a p e r
Description
Calibrates supplies in the printer.
Operators can load supplies (as described in the Equipment Manual) before running an application, but they cannot calibrate the supplies until the application calls this function. In general, you should display a message (“Load your supplies,” for example) and require the operator to press a key (the trigger might be easiest) prior to calling this function.
Do not use this function when using fax paper because it has no black mark to detect.
If an application uses this function and
pclPaperSetup, it should not use
pclCalibrate.
Syntax
unsigned short far pclCalibratePaper(
unsigned short far* lpusStockLength, unsigned short far* lpusStockWidth);
Parameters
lpusStockLength Pointer to the calibrated supply length in hundredths of an inch. Returned values are
lpusStockWidth Pointer to the calibrated supply width in hundredths of an inch. Returned values are 0 (not calibrated), 120, 150, or 200.
