Display Control
You can either enable or disable the display.
Enabling the Display
To enable the display, either
♦ press | while turning the printer on. When messages | |||
appear on the display, release the key. |
| |||
|
|
|
|
|
| If you continue to hold down | after the | ||
messages appear, the display moves to fast
mode.
♦include the LCD command in AUTOEXEC.BAT. CONFIG.SYS messages are still disabled, because the printer processes it first. See “LCD” in Chapter 7 for more information.
Disabling the Display
To disable the display, include the LCD N command in AUTOEXEC.BAT. See “LCD” in Chapter 7 for more information.
Boot Options
When DOS begins loading, you have the following options for processing CONFIG.SYS and AUTOEXEC.BAT:
♦Bypass the files
♦Be prompted whether to process each line of both files
♦Process every line of both files.
