p c l P a p e r S e t u p
Description
Gives information to the Print subsystem about the supplies being used.
If you are using paper or synthetic supplies, precede this function with a call to pclCalibratePaper.
If an application uses this function and pclCalibratePaper, it should not use pclCalibrate.
Syntax
unsigned short far pclPaperSetup(unsigned short usStockLength, unsigned short usStockWidth, unsigned short usStockType);
Parameters
usStockLength The supply length in hundredths of an inch. Values are
usStockWidth The supply width in hundredths of an inch. Values are 120, 150, and 200.
usStockType The supply type. Values are
MMS_LOW_ENERGY Paper
MMS_MEDIUM_ENERGY Fax
MMS_HIGH_ENERGY Synthetic
If you are using linerless supplies, experiment with these values to see which one achieves the best results.
