Paxar Gold 6037EX manual Printer completion status

Return Values

0	Successful.
703-793	A motion control error occurred. For errors
	between 703-793. The operator corrects the
	printer condition. Then the application must call
	pclClearError to reset the Motion Control
	subsystem. Refer to the MPCL Packet
	Reference Manual for more information.
Other non-zero	An error occurred. Refer to the MPCL Packet
	Reference Manual for more information.

Example

#include <stdio.h> #include <stdlib.h> #include "mmsultra.h"

void GetSupplyType(unsigned short *); void GetStockLength(unsigned short *); void GetStockWidth(unsigned short *);

unsigned short main(void)
{	// Printer completion status
unsigned short usStatus;
unsigned short usStockWidth;	// Stk. width in 1/100th inches

unsigned short usStockLength; // Stk. length in 1/100th inches

unsigned short usSupplyType;	// Supply type, 0 - 2
unsigned short status = 0;	// Print subsystem init. status
PRINTINIT rConfig;	// Print subsystem data struct.
status = pclInit(NULL);	// Start Print subsystem
if (status != 0)
{

printf("Init Failed\nError: %d", status); exit(1);

}

pclPaperInfo(&usStockLength, &usStockWidth, &usSupplyType);

/* GetSupplyType is a programmer-written function */ GetSupplyType(&usSupplyType);

4-40 Programmer’s Manual