Message | Solution |
|
|
Invalid Parameters for command | Verify the syntax of the command |
| and retry it with all of the |
| parameters. |
No Connection is present with | Establish a PC/printer connection. |
Ultra. |
|
No directory was specified. | Verify the syntax of the command |
| and enter a directory name where |
| specified. |
No File Specified. | A file name parameter was left blank. |
| Retry the command, listing a file |
| name. |
No Files could be found. | The file you specified in the |
| command does not exist. Verify the |
| correct name and/or spelling and |
| retry the command. |
No matching files found. | You specified file names with a wild |
| card, and there are none fitting the |
| specification. Verify the file names |
| and spelling and retry the command. |
Open Failed. | UServe is not running on the printer. |
| Start it and establish a PC/printer |
| connection. |
Response could not be read | Verify that a valid PC/printer |
from Ultra | connection exists and retry the |
| command. |
Request could not be sent to the | Verify that a valid PC/printer |
Ultra. | connection exists and retry the |
| command. |
Soft Reboot Failed. | Verify that a valid PC/printer |
| connection exists and retry the |
| command. |
Sum check received from the | Verify that a valid PC/printer |
Ultra was invalid. | connection exists and retry the |
| command. |
| Using UServe and UClient |