Electrolux Z 9 18 42-4 I Your appliance needs air, Rehingeing the door, Housing dimensions

Installation

Your appliance needs air

For safety reasons, minimum venti- lation must be as shown Fig.

Attention: keep ventilation ope- nings clear of obstruction;

50 mm	min.
	200 cm2
	min.
	200cm2
D567

Rehingeing the door

The appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom.

Warning! When changing the side at which the door opens, the appliance may not be connected to the mains. Remove plug from the mains beforehand.

Housing dimensions

Height	1780mm
Depth	550 mm
Width	560 mm

Electrical connection

A correctly installed, earthed socket is required for the electrical sup- ply. The supply must have a fuse rating of at least 10 Amps. If the socket is not accessible once the appliance is built in, the electrical installation must include suitable means of isolating the appliance from the mains (e.g. a fused spur).

☞Before initial start-up, refer to the appliance rating plate to ascertain if supply voltage and current values correspond with those of the mains at the installation location.

e.g.: AC 230 ... 240	V 50 Hz or
230 ... 240	V ~50 Hz

(i.e. 230 to 240 volts alternating current, 50 Hertz) The rating plate is inside the appliance on the left.

36