Electrolux Z 9 18 42-4 I What to do if, Correcting Malfunctions, Symptom, Possible Cause, Remedy

Models: Z 9 18 42-4 I

1 60
Download 60 pages 8.27 Kb
Page 53
Image 53
What to do if ...

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can recti- fy yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case.

Important! Repairs to refrigerators/freezers may only be performed by competent service engineers. Improper repairs can give rise to signifi- cant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or our local Customer Service.

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

Appliance does not work.

Appliance cools too much.

The refrigerator and/or freezer compartment tem- perature is insufficient.

Interior lighting does not work.

Appliance is not switched on.

Mains plug is not plugged in or is loose.

Fuse has blown or is defective

Socket is defective.

Temperature is set too cold.

Temperature is not proper- ly adjusted.

Door was open for an extended period.

A large quantity of warm food was placed in the appliance within the last 24 hours.

The appliance is near a heat source.

Light bulb is defective.

Switch on the appliance.

Insert mains plug.

Check fuse, replace if necessary.

Mains malfunctions are to be corrected by an electri- cian.

Press „+“ (WARMER) but- ton.

Please look in the “Starting up and Temperatur regula- tion” section.

Open the door only as long as necessary.

Press TURBO COOLMATIC and/or FROSTMATIC but- ton.

Please look in the

“Installation location” section.

Please look in the “Changing the light bulb” section.

53

Page 53
Image 53
Electrolux Z 9 18 42-4 I user manual What to do if, Correcting Malfunctions, Symptom, Possible Cause, Remedy