Rear Facing Customer Display
Serial Customer Display
The serial customer displays do not need drivers. To get an image on the display:
1Plug the
2Plug the
3In windows click on Start > Run
4Enter cmd > OK
5Type MODE COM1 96,N,8,1 > Enter
6Type TYPE CON > COM1 > Enter
7Type ELO > Enter
The display will show ELO.
USB Customer Display
Plug in the USB cable attached to the Customer Display unit. The New Hardware Wizard dialog box will appear.
1Choose Next and select “Search for the best driver for your device (Recommended)” then choose Next.
2When a list of search locations is displayed, place a checkmark on the drive containing the driver
package:
Touch Monitor Peripherals\Rear Facing Customer Displays\Drivers\xxx\LCLD9.sys, where xxx is Win98 for a Windows 98 based system or 2000 for a Windows XP/2000 based system.
3Insert the disk into your drive. (If the driver files have been copied to your hard drive or have been distributed on CD, place a checkmark on “Specify a location” and browse to select the directory containing the driver files.)
4 Choose Next. Once the Customer Display driver has been detected choose Next again.
5Wait while driver files are copied to your computer.
6Insert your Windows CD if prompted and choose Finish
