2-30 Elo Entuitive Touchmonitor User Guide
Installing the USB Touch DriverInstalling the USB Touch Driver for Windows XP,Windows 2000, Me and 98
1Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If Windows XP, Windows 2000,W indows 98, or W indows Me starts the Add New Hardware
Wizard:
2Choose Next. Select “Search for the best driver for your device (Recommended)” and choose
Next.
3When a list of search locations is displayed, place a checkmark on “Specify a location” and use
Browse to select the \EloUSB directory on the Elo CD-ROM.
4Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose
Next again.
5You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
If Windows XP, Windows 2000,W indows 98, or W indows Me does not start the Add New Hardware
Wizard:
NOTE: For Windows XP and Windows 2000 you must have administrator access rights to install
the driver.
1Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the
CD and starts the setup program.
2Follow the directions on the screen to complete the driver setup for your version of Windows.
If the AutoStart feature is not active:
1Click Start > Run.
2Click the Browse button to locate the EloCd.exe program on the CD-ROM.
3Click Open, then OK to run EloCd.exe.
4Follow the directions on the screen to complete the driver setup for your version of Windows.