Elo TouchSystems 2125C Series manual

Your Elo touchmonitor is plug-and-play compliant. Information on the video capabilities of your touchmonitor is sent to your video display adapter when Windows starts. If Windows detects your touchmonitor, follow the instructions on the screen to install a generic plug-and-play monitor.

Refer to the appropriate following section for driver installation instructions.

Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0

NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver.

1Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.

2Follow the directions on the screen to complete the driver setup for your version of Windows.

If the AutoStart feature is not active:

1Click Start > Run.

2Click the Browse button to locate the EloCd.exe program on the CD-ROM.

3Click Open, then OK to run EloCd.exe.

4Follow the directions on the screen to complete the driver setup for your version of Windows.

Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98

1Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If Windows 98, Windows Me or Windows 2000 starts the Add New Hardware Wizard:

2Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.

3When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CD-ROM.

2-9