Chapter 3 – Operation (Continued)
User Controls (Continued)
•To deactivate the LOCK OUT mode, simultaneously press the PROCEED and button.
AUTO Auto Adjust
Automatically adjusts the Image Position, H. Size and Fine settings.
Position Controls
H. POSITION
Controls Horizontal Image Position within the display area of the LCD.
V. POSITION
Controls Vertical Image Position within the display area of the LCD.
AUTO AUTO
Automatically sets the Horizontal and Vertical Image Position within the display area of the LCD.
Image Adjust Controls
H. SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreas- ing this setting.
Automatically adjusts the H Size settings.
AccuColor´® Control System
Five color presets select the desired color setting. Each color setting is adjusted at the factory.
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars.
Tools
OSM H POS.
OSM V POS.
You can choose where you would like the OSM™ control window to appear on your screen. Selecting OSM Location allows you to manually adjust the position of the OSM control menu left, right, up or down.
ALL RESET
Selecting ALL RESET when
Information
Indicates the current display resolution, frequency setting and type of
Sync signal the monitor is using.
NOTE: Mode Change should only be used if a resolution is not recognized by the monitor. The user can change to the appropriate resolution by selecting the Mode information and selecting (increase or decrease) the corresponding option.
NOTE: If the or button is pressed while TYPE is highlighted, then Sync Type is switched between Separate Sync and Sync On Green.
Elo LCD Touchmonitor User Guide- 11