Chapter 2 – Installation and Setup (Continued)
Installing the Serial Touch Driver for MS-DOS and Windows 3.1
1.Insert the Elo
2.From DOS, type d:\EloDW to change to the correct directory on the CD- ROM (your
3.Type install and press Enter to start the installation.
4.Align the touchscreen.
You must have already completed Steps 1 and 2 before proceeding. Refer to Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for additional installation information.
1.Type INSTALL at the DOS prompt in the directory containing the driver install files.
2.INSTALL asks you to select the software to install. Then choose d:\EloDW from the displayed list.
3.INSTALL also asks you for the paths to use during installation, or you may use its defaults. INSTALL creates directories as necessary, and warns you if they exist.
4.If you are updating your software, you may wish to specify the paths containing the earlier versions, and overwrite the obsolete files. All exe- cutable programs are upward compatible. For a list of differences from each previous version of the drivers, be sure to select "Differences from Previous Versions" during the installation process.
5.INSTALL updates your AUTOEXEC.BAT file with the drivers you select. INSTALL makes a copy of your original AUTOEXEC.BAT file, called AUTOEXEC.OLD. If you already have Elo driver commands in your AUTOEXEC.BAT file, they will be commented out.
6.When INSTALL is finished, it leaves a file called GO.BAT in the subdi- rectory you specified. GO loads the touchscreen driver, runs the calibra- tion program ELOCALIB, and gives you some final instructions.
7.If you are using Windows 3.1, you will also align the touchscreen within Windows 3.1 with the Touchscreen Control Panel.
Elo LCD Touchmonitor User Guide- 8
