3.Remove the paper backing from each washer and stick one inside of each bracket’s ear, aligning the washer’s hole
with the bracket’s hole.
4.Attach the mounting bracket to your vehicle’s surface using the supplied screws and lockwashers.
Dashboard Installation
If you are unsure how to install your scanner in your vehicle, consult your automobile manufacturer, dealer, or a qualified installer.
To mount in your dashboard, you must connect an external antenna and speaker.
1. Before installing, confirm your scanner fits in the desired
mounting area and you have all the necessary materials. Your
scanner requires a 2 x 71/8 x 5 5/16 inch (50 x 180 x 135 mm) space.
2. Remove the four rear screws and | x |
pull off the black case before |
|
installing your scanner. |
|
3.Install the DIN sleeve into the opening in your dashboard, lip facing out.
4.Push out the top and bottom tabs to hold the sleeve firmly in place.
5.Slide the scanner into the sleeve until it locks in place.