To review all locked out channels:
1.Press MAN.
2.Repeatedly pressing FUNC and then L/OUT to view each locked- out channel.
3.To unlock a channel, press L/OUT. “LO” changes to “lo.”
4.When you finish reviewing
You can manually select any channel in a bank, even in turned- off banks.
Priority Scanning
In addition to the 1,000 programmable memory channels, your scanner has one Priority channel. When Priority is turned on, the scanner checks the Priority channel every 2 seconds. This lets you scan without missing a transmission on the Priority channel.
Priority scanning does not operate for trunking transmissions. Priority check can seem random during peak hours.
To turn on the priority feature:
1.Press PRI so “pri” changes “PRI” on the display during scanning.
2.To turn off Priority, press PRI again.
To make an existing channel a Priority channel:
1.Press MAN.
2.Use the number keys to enter the bank and channel number.
The Priority channel cannot be a trunking channel (MOT, ED, or LTR).
3.Press MAN.
4.Press FUNC, then hold PRI until the display blinks.
26
