Manuals / Radio Shack / Home Audio / Satellite Radio

Radio Shack 20-163 manual Scanner Cloning, To save a Ctcss or DCS code, To clone the scanner data

Models: 20-163

1 66

Download 66 pages 53.88 Kb

Page 18

5.Press FUNC, then MODE.

6.Use the  or  to select the desired CTCSS or DCS code.

You can enter the code manually. The scanner automatically fills in the code. See Appendix B for a list of codes.

7.Press ENT.

To save a CTCSS or DCS code:

Press ENT while the code appears.

Scanner Cloning

You can transfer the programmed data to and from another PRO-163 (or PRO-164) scanner using a connecting cable which has 1/8-inch stereo (TRS) phone plugs on both ends (not supplied).

You can also upload or download the programmed data to or from a PC using an optional USB cable and application software available through your local RadioShack store. The application software is also available online at www.starrsoft.com and www.scancat.com.

To clone the scanner data:

1. Turn on both scanners.

2. Connect the connecting cable to each scanner’s PC/IF jack. ** CLONE MODE ** appears.

3. Press . “Confirm to send data?” appears.

4. Press 1 to send the data to the other unit or press any other key to cancel.

5. To exit the clone mode, remove the cable.

“CLONE MODE Incorrect Model” appears if you connect a scanner other than a PRO-163 (or PRO-164).

18

Image 18

Radio Shack 20-163 manual Scanner Cloning, To save a Ctcss or DCS code, To clone the scanner data

Contents

What’s Included Mobile / Base Radio ScannerContents Contents Your Scanner Pause EXT SP Bracket Mounting Installing Your ScannerSetting Up a Mobile Base To you use the scanner on a flat surfaceDashboard Installation Connecting the Antenna To attach the supplied antennaPowering Your Scanner Wall OutletVehicle Power Socket Vehicle DirectHeadphones and Speakers Keytones and BrightnessDelay Squelch and AttenuatorScanner Setup To set the attenuator modeDefining a Channel To define a channelCopying a Frequency To copy a frequencyTo delete all saved frequencies in a bank Deleting Saved FrequenciesTo delete a saved frequency To define a channel’s Ctcss or DCS codeScanner Cloning To save a Ctcss or DCS codeTo clone the scanner data Search Banks SearchingSeek Search To activate Seek SearchTo search banks SR0-SR2 To activate Zeromatic ZeromaticProgramming a Search Range To program the search range of Bank SR7Signal Stalker To use Signal StalkerLocking Out Frequencies Special Signal StalkerTo use Special Signal Stalker To lock out a frequencyTo unlock all frequencies in a search bank Saving Found FrequenciesTo review and unlock frequencies To save a frequency found during a searchTo scan ScanningLocking Out Channels To locked out a channelTo review all locked out channels To turn on the priority featurePriority Scanning To make an existing channel a Priority channelTo perform a weather scan Weather AlertsTo modify the Priority channel To program a weather channel into priority channelSame Standby Mode To program a Fips codeTo review stored Fips codes To enter Same standbyTo test the weather alert To use Skywarn MonitoringSkywarn To monitor a channelDefining a Trunking Bank Trunking SetupTo set a default tuning frequency To define a Trunking BankMotorola Trunking Setup To set Open or Closed mode for a bankTrunking Modes Fleet Maps To program a fleet mapBase and Offset Frequencies For Motorola Type II, enterEdacs Trunking Setup UHF-Hi 806-960 MHz To program 800 MHz Motorola trunkingLTR Trunking Setup Searching for Talk Group IDsTo save a correct Home Repeater Saving a Talk Group ID To search for Talk Group IDsTo define a Talk Group ID Deleting Talk Group IDs To delete a Talk Group IDTo delete ALL talk group IDs in a bank 1. Press Prog Trunk Scanning Saving Trunking ChannelsTrunking Delay To set a Talk Group ID delayTo lock out Talk Group IDs Locking Out Talk Group IDsTurning Off Sub-Banks To review locked-out Talk Group IDsTo turn off a sub-bank while scanning Scanner MaintenanceTalk Group ID Hold To set Talk Group ID HoldText Tags To define a Text TagTo display the Talk Group ID Troubleshooting Issue SolutionBirdie Frequencies Error message appearsWhen trying to upload or CauseService and Repair Initializing the ScannerTo initialize the scanner Scanning Legally References FCC NoticeAppendix a Glossary Search bank SR0 Marine band Receive mode FM Freq. MHz Appendix B Search BanksSearch bank SR1 CB band Receive mode AM Freq. MHz Group Search bank SR4 Aircraft Receive mode AM, FM Appendix C Ctcss / DCS Codes Ctcss CodesAppendix D Signal Stalker All BandDCS Codes PubSafety Band Appendix E Talk Group Format MotorolaTo use AFS format Appendix F Specifications Sensitivity 20 dB S/NDB +/-4 kHz Addendum Cat. No -163Purple DOT Purple DOT BB Business Band Police Departments Police Dept Nascar Track Announcer Security Alarm Security Company Companies DOT Business Band DOT BB Limited One-year Warranty