Radio Shack 20-163 manual Deleting Talk Group IDs, To delete a Talk Group ID

6. Use the number and decimal point keys to enter the Talk Group ID:

For ED Talk Group IDs, you can enter either a decimal or AFS code. The default setting is decimal ID entry.

To use the AFS code, press FUNC then 2, “AFS Format” appears for about 2 seconds. You can then enter the AFS code.

If you make a mistake, “Invalid ID value” appears when you press ENT. Go back to Step 3.

If you entered an ID that is already stored in same bank, “Dupl. ID of X-XX appears.” To store the ID code, press ENT. To cancel, press CL.

7.Press ENT.

For information about adding text tags to a Talk Group ID, see “Text Tags” on Page 43.

Deleting Talk Group IDs

You can delete an individual Talk Group ID or all Talk Group IDs in a bank.

To delete a Talk Group ID:

1.Press PROG then TRUNK.

2.Press FUNC,  or  to select ID memory.

3.Press FUNC then CL.

To delete ALL talk group IDs in a bank: 1. Press PROG.

2.Press TRUNK to enter a Talk Group ID memory mode.

3.Select a Talk Group ID bank using FUNC,  or .

4.Press FUNC then 6. “Clear entire list? Press 1 to clear all, any other key aborts” appears.

38