To search for Talk Group IDs:
1.Set the bank to Open mode.
2.Press SCAN. The scanner scans through all unlocked channels in the active banks.
3.When the scanner stops on a transmission, press TRUNK. The scanner displays the ID location:
ID Location | |
|
|
|
|
Example:
If the ID has already been saved, “ID was saved” appears.
If you try to store more than 150 talk group IDs in a bank, “Memory Full!” appears.
Saving a Talk Group ID
Each of the 10 banks contains 5
To define a Talk Group ID:
1.Press PROG, then press TRUNK to enter the ID program mode.
2.Press FUNC, then use or to select a bank.
3.Repeatedly press MODE to select a trunking mode (Motorola, EDACS, or LTR).
4.Repeatedly press TRUNK to select the
5.Press or to select the location where to store the Talk Group ID.
37