Elo TouchSystems SW 601075 manual Procedure

OR

II) Use the Elo recovery DVD

(Some Windows XP versions include a recovery DVD; for these systems there is no recovery partition on the HDD, so you must follow the following procedure to recovery the system. Some Windows XP versions, and ALL POSReady 2009 and Windows 7 touchcomputers come with the built-in recovery partition on the installed HDD; they do not include recovery media. In the event the HDD recovery partition is accidentally deleted or becomes or inaccessible, POSReady 2009 and Windows 7 systems do not include a recovery DVD. You will need to must request a recovery DVD from Elo TouchSystems customer service. Contact information can be found on the last page of this guide.)

Hardware needed:

1.Elo Touchcomputer

2.External USB DVD Drive

3.Elo Windows XP, POSReady 2009 or Windows 7 Recovery DVD

Procedure

1.Connect the USB DVD drive to the touchcomputer.

2.Place the recovery DVD in the DVD drive.

3.Power on your touchcomputer and press “F11” to enter Device Boot Menu and boot from DVD.

4.If “F11” doesn’t open the Device Boot Menu (depending on your model), power off, then power on again and press “F8” to enter the Device Boot Menu.

5.After entering the System Recovery Tool, click the “WINPE” button.

B-SERIES TOUCHCOMPUTER USER GUIDE 32